Specifications
TURNTABLE SECTION
|
|
Type:
|
Quartz direct drive
Manual turntable
|
Drive method:
|
Direct drive
|
Motor:
|
Brushless DC motor
|
Turntable platter:
|
Aluminum diecast
Diameter 33.2cm (13-5/64”)
Mass 1.7kg (3.74lb.)
|
Turntable speeds:
|
33-1/3 r/min, 45 r/min
|
Variable range pitch:
|
±8%
|
Starting torque:
|
1.5kg-cm (1.3lb-in)
|
Build-up characteristics:
|
0.7s, from standstill to 33-1/3 r/min
|
Braking system:
|
Electronic brake
|
Wow and flutter:
|
0.01% WRMS*
0.025% WRMS (JIS C5521)
±0.035% peak(IEC 98A Weighted)
|
Rumble:
|
-56dB (IEC 98A Unweighted)
-78dB (IEC 98A Weighted)
|
*This rating refers to turntable assembly alone, excluding effects of record, cartridge or tonearm, but including platter. Measured by obtaining signal from built-in frequency generatorofmotor assembly.
|
|
|
TONEARM SECTION
|
|
Type:
|
Universal
|
Effective length:
|
230mm (9-1/16”)
|
Arm height adjustment range:
|
0-6 mm
|
Overhang:
|
15mm (19/32”)
|
Effective mass:
|
12g (without cartridge)
|
Offset angle:
|
22°
|
Friction:
|
Less than 7 mg (lateral, vertical)
|
Tracking error angle:
|
Within 2°32’ [at the outer groove of 30cm (12”) record]
|
|
Within 0°32’ [at the inner groove of 30cm (12”) record]
|
Stylus pressure adjustment range:
|
0-4g
|
Applicable cartridge weight range:
|
3.5-13g
|
|
11-20.5g (including headshell)
|
(with auxiliary weight);
|
9.5-13g
|
|
17-20.5g (including headshell)
|
(with shell weight);
|
3.5-6.5g
|
|
11-14g (including headshell)
|
Headshell weight:
|
7.5g
|
|
|
GENERAL
|
|
Power supply:
|
AC110-127V/220-240V, 50Hz
(E,EB,GN)
|
|
AC120V, 60Hz (PP)
|
Power consumption:
|
14W (E,EB,GN)
13.5W (PP)
|
Dimensions (W×H×D):
|
45.3×17.2×35.5cm
(17-27/32”×6-25/32”×13-31/32”)
|
Mass:
|
12kg (26.4lb)
|
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
|